We have a few other upgrades that work fantastic wit the VM34 kit. We can bundle together or purchase separately when you need them. All parts are available on the website or direct.
The new system bolts on in about 20-30 minutes and increases throttle response and adds HP and Torque throughout the rpm range.
The kit Includes the following.
2 new Modified Mikuni 34 mm carbs pre-jetted run and tested adjusted and balanced
2 new tuned length intake manifolds
2 new Mikuni spigot mounts
2 new Lifetime washable oil able 4 ply cotton oval pod filter with clamp
1 new Custom made throttle cable
Installation hardware and new viton o-rings
Fuel line and brass splitter t
All carb kits are test run and synced before shipment.
You will need nothing else to install the system
You will need nothing else to install the system
Iridium ngk spark plugs are recommended http://www.speedmotoco.com/CX500-NGK-Iridium-Plug-Kit-p/dr8eix.htm
Raising the main needle to tweak for more mid range and top end
CX GL exhaust upgrade. Info Below.
CX/GL Brass rod upgrade.
Fuel Filter is recommended http://www.speedmotoco.com/product-p/43-15-3.htm
Heavy duty clutch springs are recommended (Kit adds torque and clutch slippage may result. It is a good idea to do this with installation of kit.) http://www.speedmotoco.com/cx500-gl500-cx650-cx650-clutch-spring-heavy-duty-p/smc-hd14.htm
If you need brass rods for the cap we have them on our website or contact us below.
Any Questions? email or call us!
shop@speedmotoco.com
541 687 6400
